Laminate Metal Sheet,Dewrative Steel Sheet,Pvc Coated Steel,Vcm Steel

Specifications for printing plates

When using the printing plate, you must pay attention to the relevant operations of the specifications, so that you can do regular maintenance as much as possible. Pay special attention.

Generally, the printing plate can be selected according to the standard color of the manufacturer, which can shorten the workload in the early stage of production. If a special color is required, the paint can be produced only when the paint is first configured in the paint factory and when the properties meet the requirements, so the time from ordering to the production of the printing plate will be longer. The surface gloss of the coating measured with a reflection angle of 60 degrees, the larger the value, the higher the gloss, the medium light and matt of the paint used in architecture, between 30-55. This is because high-gloss coatings are used in buildings to reflect strong and dazzling sunlight; if indoors, it is easy to cause visual fatigue under the lights at night.

The coating film of the printed board is made of baking synthetic resin coating. When used outdoors, the coating film will gradually deteriorate due to the influence of sunlight, temperature and rain. Carefully observe the surface of the steel plate, or touch it with your fingers. A white powder was found. This phenomenon is the chalking of the coating film, which is unavoidable. However, by choosing a different type of coating, the age of chalking can be delayed. In addition, the service life is different in different regions such as coastal areas, industrial areas and rural areas. In the event of corrosion such as chalking and cracking of the coating film, repainting should be carried out to prolong the service life.

When using the printing plate, the environment and scope of use should be considered. After all, only reasonable use can better grasp the skills of its use, so everyone must pay special attention to it.